Fabricated T Strainer stainless steel 304 316 flange end

T Strainer
The T Strainer is shaped like the letter "T" type, so we're called the T Strainer. T Strainer is to remove a small amount of solid particles in liquids of small equipment, the normal work of the protection equipment, when the fluid into the home of a certain size filter cartridge, the impurities are blocked, and clean filtrate from the filter outlet discharge, when cleaning, as long as can be disassembly of the filter cylinder is removed, you can reload after treatment. Therefore, the use of the maintenance is very convenient.
- DN200 to DN350 "UNC-2B tapping.
Optional strainer screens - Available on request for all sizes:
- Stainless steel strainer screen having 0.8 mm perforations.
- Stainless steel strainer screen having 1.6 mm perforations.
- Stainless steel strainer screen having Mesh 40.
- Stainless steel strainer screen having Mesh 100.
Standards
This product fully complies with the requirements of the European Pressure Equipment Directive 97 / 23 / EC and carries the mark when so required.
Certification:
This product is available with certification to EN 10204 3.1 and NACE approval.
Note: All certification / inspection requirements must be stated at the time of order placement.
Hot tags: T Strainer, China manufacturer, factory, mill, supplier, cheap
Fabricated T Strainer
Typical Service
ISO 9001-2008 quality management
Standard ASME "U" and “UM” Code Stamp
"N" stamp available
Brazilian NR-13 available
European standards - DIN/PED available
Properly sized components to meet any specified flow rate and retention requirement
NSF approved coatings
Ultra low discharge strainer technology that offers reduced purged volumes
Screens
» Standard material is 304SS.
» Specify other alloy material as required.
» Specify perforation and mesh size for proper particle retention.
» Consider maximum allowable pressure drop when specifying.
General
Fabricated "T-Type" Strainers, can be used as an alternative to our standard cast range in order to comply with specific project specifications. They are also generally more cost effective and readily available for larger sizes i.e. above 12"(300mm)NB and higher pressure.
Established in 1984, Huachao is one of the leading manufacturers and suppliers of quality high-tech fabricated t strainer. We are equipped with a professional factory which has a strict quality control system. May you need it, welcome to wholesale fabricated t strainer at competitive price with us.